Inhaltsverzeichnis - Elcometer NDT MTG6 Gebrauchsanleitung

CONTENTS
Section
1 Gauge Overview
2 Box Contents
3 Using the Gauge
4 Getting Started (including Display Modes)
5 Setting Limits - MTG8
6 Setting the Zero Point
7 Calibration Methods
8 Calibrating Your Gauge
9 PIN Lock
10 Taking a Reading
11 Batching
12 Reviewing Batch Data
13 Menu Structure - MTG8
14 Menu Structure - MTG6
15 Downloading Data
16 Upgrading Your Gauge
17 Spares & Accessories
18 Warranty Statement
19 Technical Specification
20 Legal Notices & Regulatory Information
21 Appendix 1: Preparing The Test Surface
Pb Hg
For the avoidance of doubt, please refer to the original English language version.
Gauge Dimensions: 145 x 73 x 37mm (5.7 x 2.87 x 1.46") - without transducer
Gauge Weight: 210g (7.4oz) - including batteries, without transducer
Material Safety Data Sheets for the ultrasonic couplant supplied with the Elcometer MTG6 & MTG8 and available
as an accessory, are available to download via our website:
Elcometer Ultrasonic Couplant Material Safety Data Sheet:
www.elcometer.com/images/stories/MSDS/Elcometer_Ultrasonic_Couplant_Blue.pdf
Elcometer Ultrasonic Couplant (High Temperature) Material Safety Data Sheet:
www.elcometer.com/images/stories/MSDS/elcometer_ultrasonic_couplant_hi_temp.pdf
© Elcometer Limited 2014-2017. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
stored (in a retrieval system or otherwise) or translated into any language, in any form or by any means (electronic,
mechanical, magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Limited.
en-1
R
Page
en-2
en-2
en-3
en-4
en-9
en-12
en-13
en-14
en-20
en-21
en-23
en-25
en-28
en-29
en-30
en-31
en-31
en-35
en-36
en-37
en-38
www.elcometer.com