Technical Data - Hilti SF 2-A Bedienungsanleitung

Designation
Drilling diameter range in wood
(hard)
Drilling diameter range in metal
Wood screws (max. length 80 mm) ∅ 3...6 mm
en

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC
voltage)
Weight in accordance
with EPTA procedure
01/2003
Speed in 1st gear (with
B 12/2.6)
Speed in 2nd gear
(with B 12/2.6)
Torque with tool set
to drilling symbol
(soft/flexible joint)
Torque range (15 set-
tings)
NOTE
The vibration emission level given in this information sheet has been
measured in accordance with a standardized test given in EN 60745 and
may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level
represents the main applications of the tool. However if the tool is used for
different applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the exposure
level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period. Identify additional
safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organization
of work patterns.
30
Printed: 24.03.2014 | Doc-Nr: PUB / 5174884 / 000 / 00
Downloaded from www.Manualslib.com
SF 2-A
10.8 V
1.1 kg
0...400/min
0...1,500/min
Max. 12 Nm
0.5...3.5 Nm
manuals search engine
Description
∅ 0.8...10 mm
∅ 0.8...6 mm
SFD 2-A
10.8 V
1.0 kg
0...400/min
0...1,500/min
Max. 12 Nm
0.5...3.5 Nm