Herunterladen Inhalt Inhalt Diese Seite drucken

Hilti SF 2-A Bedienungsanleitung Seite 39

Vorschau ausblenden Andere Handbücher für SF 2-A:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
5.3.3 Battery tool use and care
a) Ensure the switch is in the off position before inserting battery pack.
Inserting the battery pack into power tools that have the switch on invites
accidents.
b) Do not expose batteries to high temperatures or fire. This presents
a risk of explosion.
c) Do not disassemble, squash or incinerate batteries and do not
en
subject them to temperatures over 80°C. This presents a risk of fire,
explosion or injury through contact with caustic substances.
d) Avoid ingress of dampness.Dampness may cause a short circuit
resulting in a risk of burning injury or fire.
e) Use only batteries that are approved for use with the applicable tool
or appliance. Use of unapproved batteries or use of the batteries for
areas of application for which they are not approved presents a risk of
fire and explosion.
f)
Observe the special instructions applicable to the transport, storage
and use of Li-ion batteries.
g) Remove the battery before storing or transporting the power tool.
h) Avoid short-circuiting the battery. Check that the terminals on the
battery and in the power tool are free from foreign objects before
inserting the battery in the power tool. Short circuiting the battery
terminals presents a risk of fire, explosion and chemical burns.
i)
Do not charge or continue to use damaged batteries (e.g. batteries
with cracks, broken parts, bent or pushed-in and/or pulled-out
contacts).
j)
If the battery gets too hot to touch, this may indicate that it is faulty.
Place the tool in a location where it can be kept under observation,
well away from flammable materials, and allow it to cool down.
Contact Hilti Service after the battery has been allowed to cool.
5.3.4 Electrical safety
Before beginning work, check the working area (e.g. using a metal
detector) to ensure that no concealed electric cables or gas and water
pipes are present. External metal parts of the power tool may become live,
for example, when an electric cable is damaged accidentally. This presents
a serious risk of electric shock.
36
Printed: 24.03.2014 | Doc-Nr: PUB / 5174884 / 000 / 00
Downloaded from
www.Manualslib.com
manuals search engine

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sfd 2-a

Inhaltsverzeichnis