Technical Data - Hilti UH 240-A Bedienungsanleitung

4. Technical data

Tool
Rated voltage
Weight as per EPTA-Procedure 01/2003
Dimensions (L×H×W)
Speed
Chuck / clamping dia. range (quick-release chuck)
Torque
Torque adjustment
Speed control
Forward / reverse
Spindle lock
Motor brake
Gearing section sealed to prevent entry of dust and with permanent lubrication (maintenance-free)
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted noise power level:
Typical A-weighted noise pressure level:
For the given sound power level as per EN 60745, the tolerance is 3 dB.
Wear ear protection!
Triaxial vibration value (vibration vector sum)
measured in accordance with EN 60745-2-1
Drilling in metal, (a )
h, D
Hammer drilling in concrete, (a
measured in accordance with EN 60745-2-2
Screwdriving without impact, (a
Uncertainty (K) for triaxial vibration value :
Battery
Rated voltage
Battery capacity
Weight
Temperature monitoring
Type of cell
No. of cells
Right of technical changes reserved!
Printed: 07.07.2013 | Doc-Nr: PUB / 5071284 / 000 / 00
)
h, ID
):
h
24 V –––
- - -
4.1 kg
320×286×92 mm
1 st gear: 0– 350 r.p.m.
2 nd gear: 0–1300 r.p.m.
3 rd gear: 0–1950 r.p.m.
1.5–13 mm
Max. 45 Nm (at drilling setting)
5–17 Nm (in 15 increments)
Electronic control switch
Electrical switch with interlock to prevent activation
when running
When control switch is in the "off" position
By way of the control switch
104 dB (A)
93 dB (A)
< 2.5 m/s 2
13.9 m/s 2
< 2.5 m/s 2
1.5 m/s 2
B24/2.0 NiCd B24/2.4 NiCd
24 V ––– 24 V –––
- - - - - -
24 V × 2.0 Ah 24 V × 2.4 Ah
= 48 Wh = 58 Wh
1.38 kg 1.38 kg
yes yes
Nickel-cadmium Nickel-cadmium Nickel-metal hydride
SUB C type SUB C type
20 20
en
B24/3.0 NiMH
24 V –––
- - -
24 V × 3.0 Ah
= 72 Wh
1.45 kg
yes
SUB C type
20
13