General Information - pajunk NRFit Gebrauchsanweisung

2. Push the catheter with the marked end into the target area until it has
reached the required depth.
3. Once it is in place, remove the cannula via the catheter. Hold the catheter
tight with your other hand if necessary.
4. Once the cannula has been removed, use the clamping adapter to connect
the catheter.
5. Fill the filter with the anaesthetic to be used for anaesthesia in order to com-
pensate for the dead space volume.
6. Connect the catheter adapter to the filter hub.
7. Fill a syringe of suitable size with the selected anaesthetic or analgesic and
connect it to the filter hub. The catheter system is now ready for injection.
8. Connect the catheter with the appropriate fixing aids (either FixoLong or
FixoCath) close to the outlet site.
Fastening of the FixoLong (optional)
1. Fasten the PAJUNK® adhesive bandage with the fixated catheter cross in the
vicinity of the catheter exit.
2. Lock the catheter in the fastening clips. This guarantees maximum freedom
of movement while simultaneously fixating the catheter.
3. Place the filter adapter on the catheter cross.
4. Secure the flat filter on the filter adapter.
Operating and storage conditions
Temperature limit
Humidity limitation
Keep away from sunlight
Keep dry

General information

The devices are manufactured in accordance with globally applicable guidelines
for hazardous substances.
Any serious incident that has occurred while using the device should be
reported to the manufacturer and the corresponding authorities of the country
the user and/or patient are residing in.
PAJUNK® GmbH Medizintechnologie, Karl-Hall-Strasse 1, 78187 Geisingen,
Germany.
+10 °C to +30 °C
20 % to 65 %
15