Beard Trimmer Attachment; Disposal; Packaging - Silvercrest SRR 3.7 C4 Bedienungsanleitung

7. Push the blade unit 4 and the shaving
attachment 5 back together and close
the blade unit 4, so that it clicks into
place.
8. Push the shaving attachment 5 back
onto the shaver 8, and ensure that it
clicks firmly into place.
NOTE: for thorough cleaning, an ultrasonic
bath is recommended.
7.3 Beard trimmer
attachment
• Remove the comb attachment 1. Rinse
the comb attachment 1 with water and
let it dry before reattaching it to the de-
vice.
• Remove the hair remnants from the
beard trimmer attachment 3 by using
the cleaning brush 20 included in the
delivery.
• Every 6 months or so, apply a few
drops of oil to the cutting edge of the
beard trimmer attachment 3. Using a
soft, lint-free cloth, wipe off the surplus
oil, if necessary. Only use acid-free oil,
such as e.g. sewing machine oil.

8. Disposal

The battery integrated into this
device must not be disposed
of in household waste. The de-
vice must be disposed of prop-
erly with the battery installed.
This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates that
the product requires separate
refuse collection in the European Union. This
applies to the product and all accessories
marked with this symbol. Products identified
with this symbol may not be discarded with
normal household waste, but must be taken
to a collection point for recycling electric
and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
27
GB