Technical Data - Parkside PSBSAP 20-Li A1 Originalbetriebsanleitung

Technical data

Cordless combi drill PSBSAP 20-Li A1
Rated voltage
Gears
Rated idle speed
Stroke frequency
Max. torque
Torque levels
Chuck capacity
Max. drill diameter
Battery PAP 20 A1*
Type
Rated voltage
Capacity
Cells
High-speed charger PLG 20 A2*
INPUT
Rated voltage
Rated power
consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT INCLUDED
PSBSAP 20-Li A1
20 V (DC)
2-speed gearbox
1st gear: n 0–400 rpm
0
2nd gear: n 0–2000 rpm
0
1st gear: n 0–7200 rpm
0
2nd gear: n 0–36000 rpm
0
80 Nm
1–21 + 1 drill setting/
+ 1 hammer setting
max. Ø 13 mm
65 mm for wood
16 mm for tiles
13 mm for steel
LITHIUM ION
20 V (DC)
2 Ah
5
230–240 V ∼, 50 Hz (AC)
85 W
T3.15A
3.15 A
21.5 V (DC)
3.5 A
approx. 45 min
II / (double insulation)
Noise emission value
Noise measurement value determined in accordance
with EN 62841. The A-rated noise level of the power
tool is typically:
Sound pressure level
Uncertainty K
Sound power level
Uncertainty K
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Impact drilling in concrete
Uncertainty
Wear ear muffs!
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
L = 88 dB (A)
PA
K = 5 dB
PA
L = 99 dB (A)
WA
K = 5 dB
WA
a = 6.0 m/s 2
,ID
H
K = 1.5 m/s 2
GB │ IE │
19 ■