Safety; Intended Use - WIKA T53.10 Betriebsanleitung

2. Safety

2. Safety
GB

2.1 Intended use

The temperature transmitter T53.10 is a universal, configurable
transmitter for use with single and dual resistance thermometers
(RTD), thermocouples (TC), resistance and sensor sources as well
as potentiometer measuring.
The temperature transmitter has been designed and built solely for
the intended use described here, and may only be used accordingly.
The technical specifications contained in these operating instruc-
tions must be observed. Improper handling or operation of the instru-
ment outside of its technical specifications requires the instrument
to be shut down immediately and inspected by an authorised WIKA
service engineer.
If the temperature transmitter is transported from a cold into a warm
environment, the formation of condensation may result in the instru-
ment malfunctioning. Before putting it back into operation, wait for the
instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
6
WARNING!
Before installation, commissioning and operation,
ensure that the appropriate temperature transmitter has
been selected in terms of measuring range, design and
specific measuring conditions.
Non-observance can result in serious injury and/or
damage to equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.
WIKA Operating Instructions Temperature Transmitter T53