Adjusting The Base Station Ringer Volume; Switching The Button Click On Or Off - switel D6540 Bedienungsanleitung

8.2

Adjusting the base station ringer volume

The base station ringer volume can be adjusted in two steps or switched
off altogether.
PROGRAMMING STEPS
1. Press the
the base station until you
hear a signal and then
release.
2. Repeat the process under
1.
8.3

Switching the button click on or off

Each time a button on the handset is pressed, this is confirmed with a
short signal tone (button click).
PROGRAMMING STEPS
1. Hold the
2. Press the
3. The button click can now
be switched on or off by
pressing the appropriate
button
4. Confirm with
entries will be saved.
94
Downloaded from www.Manualslib.com
- Special functions -
button on
button.
button.
or .
and the
manuals search engine
YOU WILL HEAR
You will hear the selected volume.
After each step, you will hear the
selected volume. When the ringer is
switched off, you will hear two signal
tones.
DISPLAY
Certain symbols will appear.
The current setting will be shown in the
display.
= button click off
= button click on
= button click off
= button click on