Eko CORE Gebrauchsanweisung Seite 7

5. Cautions
To reduce the risk of device interference, keep CORE at least 1
meter away from all RF emitters including Wifi routers and radios.
Follow all cleaning and disinfecting instructions included in
this manual. Establish and follow a cleaning and disinfecting
schedule.
To reduce the risks associated with inaccurate data acquisition
store and operate this stethoscope only as instructed in this
manual. It is highly recommended that the battery be recharged
within thirty minutes of the LED indicator turning orange.
Recharge the battery using only the provided USB power cord
with a UL-certified USB wall charger (not provided).
DO NOT immerse the stethoscope in a liquid or subject it to any
sterilization processes other than those described in this manual.
To reduce the risks associated with very strong
electromagnetic fields
avoid using the stethoscope near strong
radio frequency (RF) signals or portable and/or mobile RF
devices and/or specific RF emitters that are known sources of
electromagnetic disturbance such as diathermy, electrocautery,
RFID, security systems (e.g., electromagnetic anti-theft systems,
and metal detectors). Interference from hidden RF emitters like
RFID might cause packet loss and this will be visible as a "Poor
Bluetooth Signal" message on the mobile application. Move away
from the hidden RF emitter if this happens.
If sudden or unexpected sounds are heard, move away from any
radio transmitting antennas. Using accessories, transducers, and
cables not produced by Eko Devices, Inc. may result in increased
RF emissions or decreased immunity of the CORE.
Please read, understand, and follow all safety information
contained in these instructions prior to using the CORE. It is
recommended that these instructions be retained for future
reference.
To reduce the risk associated with an electrical shock do not
use the stethoscope without the analog stethoscope's chest
piece in place.
7