Eko CORE Gebrauchsanweisung Seite 13

8. Installation to Existing Stethoscopes
This section is not required for pre-assembled digital stethoscopes
Step One
Grip chest piece with one hand and pull the
tubing with force using the other hand to
detach the chest piece from the tubing of
the existing stethoscope. Insert the chest
piece into the Eko-compatible adapter
tubing provided
Step Two
Attach the CORE Digital Attachment to the
other end of the Eko-compatible adapter
tubing provided
Step Three
Attach the tubing of the existing digital
stethoscope to the other end of the CORE
Attachment and assembly of the CORE
digital stethoscope is now complete
Figure 2
13