Rimage PrismPlus! User Guide
Clean the Print Head – Alternate Method
If a cleaning kit is not available, use the following cleaning procedure.
Required tools
#
•
99% Isopropyl alcohol
•
Cotton swabs
1.
Prepare the
a.
Power on the
b.
Press the
c.
Power off the
d.
Remove the
e.
Remove the
print head.
2.
Clean the
-
Important!
a.
Apply
isopropyl alcohol to a cotton swab.
b.
Insert the
elements.
3.
Clean the front two
a.
Apply isopropyl alcohol to a clean
b.
Run the
c.
Repeat
4.
After the alcohol on the print head dries, prepare the
a.
Install the
b.
Replace the
c.
Power on the
The printer is ready for use.
18
Downloaded from
www.Manualslib.com
:
Prism.
Prism.
operator button to open the printer tray.
Prism.
top cover.
ribbon. Refer to
Change the Print Ribbon
Do not remove the print head.
cotton swab in the drawer opening and lift the swab upward as you run the swab against the print head
Note:
The bottom of the print head is shown to illustrate elements to clean.
ribbon guides.
cotton swab.
swab against a ribbon guide to clean it.
steps a – b for the second ribbon guide.
ribbon.
top cover.
Prism.
manuals search engine
on page 19.
Clean convex surface while print
head is still installed
Prism for use.
110635_J