Rimage PrismPlus! Benutzerhandbuch Seite 14

4. Install the printer driver.
-
Important!
Anyway.
a. If the driver is being installed for the first time, make sure that the
b. Navigate to the
•
In Windows 2000,
•
In Windows XP and Windows Server 2003,
box opens.
c. Start the
i. Select
ii. Select
iii. Select the
iv. Clear the
v. Select
vi. Select the
vii. From the list of available ports, select the desired

viii. Select
d. Select the
i. Select
ii. Select
iii. Navigate to the folder containing the Prism
•
•
iv. Select the
v. Select
vi. Select
vii. Select
•
•
viii. Select the
ix. Select
e. Set up the
-
Important:
i. In the
desired.
ii. Select
iii. Select the
iv. Select
v. Select the
vi. Select
vii. Select
f. If you see a warning that states that the software did not pass Windows Logo testing, select
110635_J
Downloaded from www.Manualslib.com
Set Up a Standalone Prism Printer or AutoPrism AutoPrinter
If you see a warning stating that the software did not pass Windows Logo testing, select Continue
print settings.
navigate: Start > Settings > Printers. The Printers dialog box opens.
Add Printer Wizard.
Add Printer. The Add Printer Wizard opens.
Next. A Local or Network Printer dialog box opens.
Local Printer option button.
Automatically detect and install my Plug and Play printer checkbox.
Next. The Select the Printer Port dialog box opens.
Use the following port option button.
Note: Select the first USB port if more than one is listed.
Next. The Install Printer Software dialog box displays.
printer driver file.
Have Disk. The Install From Disk dialog box opens.
Browse.
If you just downloaded the driver,
If you are installing the driver for the first time, browse to the software CD and
Prism > Win2k_XP.
ccd2kxp.inf file.
Open.
OK. Rimage Perfect Image Printer PF displays in the Printers list.
Next.
If the driver is being installed for the first time, the
If the Prism printer driver was previously installed, the Add Printer Wizard asks whether you wish to keep the
existing driver or replace it.
Replace Existing Driver option button.
Next. The Name Your Printer dialog box opens.
printer.
Do not change the printer name.
Name Your Printer dialog box, select the Yes option button to use this printer as the default printer, if
Next. The Printer Sharing dialog box opens.
Do not share this printer option button.
Next. The Print Test Page dialog box opens.
No option button.
Next. The Add Printer Wizard displays the printer settings you have specified.
Finish.
manuals search engine
software CD is in the PC disc drive.
navigate: Start > Printers and Faxes. The Printers and Faxes dialog
printer port.
driver file:
navigate: C: > Win2k_XP.
Name Your Printer dialog box opens. Skip to step e.
navigate: Printer Drivers >
Continue Anyway.
11