Rimage PrismPlus! Benutzerhandbuch Seite 15

Rimage PrismPlus! User Guide
5. Configure the
a. Right-click on the
b. Select Properties. The Rimage Perfect Image Printer PF Properties window opens.
c. On the
i. Select the type of

ii. Change the
•
•
d. On the
i. If the Prism is being used as a standalone printer or is attached to an AutoPrinter, select
so program finishes printing faster.
ii. Make sure the
e. Verify the
i. Select the

ii. On the Prism printer, press the
iii. Place a
iv. Press the
v. Select the
vi. Select
vii. If the USB port is not correct, repeat steps i–vi, with a different USB port selected, until the test is successful.
-
viii. After a test image successfully prints, select
The driver installation is complete.
12
Downloaded from www.Manualslib.com
Prism driver options.
Printer icon.
Device Settings tab:
installed ribbon. A monocolor ribbon is shipped with new Prism printers.
Note: The Double Print feature that is available with monocolor ribbons allows you to print the same label
twice on the disc. If you would like the printed areas on your discs to have more density, enable Double
Print. Using Double Print consumes more ribbon.
Master Print Strobe to achieve the best print results.
350 ms for monocolor
425 ms for color
Advanced tab:
Enable advanced printing features box is clear.
USB port selection:
Ports tab.
Note: The USB port selected is the port that the driver attempts to use. This verifies whether this port is the
correct port for the printer.
operator button to open the tray.
disc on the printer tray.
operator button to close the tray.
General tab.
Print Test Page. If the USB port selected is correct, a test image prints on the disc.
Important!
If you try multiple USB ports before the test successfully prints, be sure to delete the extra jobs
in the print queue.
manuals search engine
OK.
Spool print documents
110635_J