Battery Memory Set - DF-models I-Peak 100 V3 Betriebsanleitung

BATTERY MEMORY SET

For your convenience I-Peak 100 charger
has a data storage and load program, it can store 10
different battery data represent the respective
specifications of batteries, you can call back the
data when charging/discharging without setting
up the program again, press START/
ENTER button to make it blink and use INC. or
DEC. to set up the parameter.
The example is Lipo battery pack (2S/7.4V).
Set the voltage and number of cells, along with
the normal voltage (1S-6S).
Set the charge current, it can be adjusted
0.1-10.0A.
Set the discharge current, it can be adjusted
0.1-5.0A.
Set the discharge voltage, it can be adjusted
(3.0-3.3V/Cell).
22