Discharging Lithium Battery - DF-models I-Peak 100 V3 Betriebsanleitung

LITHIUM BATTERY(LiPo/LiFe/LiIon/LiHV)PROGRAM
Start
Enter
Elapsed Supplied
Number
time capacity
of
Charge
cells
or discharge
current

DISCHARGING LITHIUM BATTERY

-
+
DEC. INC. DEC. INC.
Batt type Start
Stop Enter
Start
Enter
Elapsed
Number
Battery
time
of
voltage
cells
Discharge
current
This screen shows the real-time status
charging. Press BATT TYPE/STOP button
once to stop the charge process.
Current
voltage
battery
The value of discharge current on the left
can not exceed 1C, and the value on the
right can not be under the voltage
- +
recommended by the manufacturer to avoid
over discharging. press the START/ENTER
>3 seconds
button for more than 3 seconds to start
discharging.
This screen displays the number of cells you
set up and the processor detects.
R=Number of cells detected by charger.
S=Number of cells set by you at the previous
screen.
If both numbers are identical you can start
charging process. If not, press BATT TYPE
/STOP button to go back to previous screen to
recheck the number of cells of the battery pack
before going ahead.
Discharged
capacity
This screen shows the real-time status of
discharging, you can press BATT TYPE/STOP
button to stop discharging.
17