Toshiba MMY-MAP0501T8 Installations-Handbuch Seite 14

5
REFRIGERANT PIPING
MMY- Pipe diameter
∗ ∗ ∗ ∗ ∗
MAP0501
∗ ∗ ∗ ∗ ∗
MAP0601
∗ ∗ ∗ ∗ ∗
MAP0801
∗ ∗ ∗ ∗ ∗
MAP1001
∗ ∗ ∗ ∗ ∗
MAP1201
• Extruding margin of copper pipe with flare machining : B (Unit: mm)
Copper pipe outer dia.
9.5
12.7
15.9
∗ When using the conventional flare tool, to
connect R410A pipes with flaring, make a
margin approx. 0.5mm longer than that of
R22 pipe so that the flare size matches
with the specified one. It is convenient to
use a copper pipe gauge for size
adjustment of the extruding margin.
Downloaded from www.Manualslib.com
Pipe connecting method of valve at gas side (Example)
Draw-out forward
Ø15.9 Connect Ø15.9 pipe with flaring.
Ø19.1 Connect the attached pipe to the valve with
flaring, and then braze the elbow and pipe
procured locally.
Ø22.2 Cut L-shape pipe at the straight
section, and then braze the elbow,
socket and pipe procured locally.
Section to
be cut
Ø28.6 Cut L-shape pipe at the straight
section, and then braze the
elbow and pipe procured locally.
Section to
be cut
Rigid (Clutch type)
R410A tool used
0 to 0.5
manuals search engine
Connect Ø15.9 pipe with flaring.
Connect the attached pipe to the
valve with flaring, and
then braze the socket,
elbow and pipe
procured locally.
Attached pipe
Pipe
Elbow
Cut L-shape pipe at the straight
section, and then braze the elbow,
socket and pipe procured
locally.
L-shape
pipe
Attached
pipe
Elbow
pipe
Pipe
Cut L-shape pipe at the
straight section, and then
braze the elbow, socket
and pipe procured locally.
L-shape
pipe
Elbow
pipe
Imperial (Wing nut)
Conventional tool used
1.0 to 1.5
• Extruding margin of copper pipe with flare tools :
A (Unit: mm)
Copper pipe outer dia.
9.5
12.7
15.9
11
Draw-out downward
Attached pipe
Socket
Pipe
Elbow
Pipe
Section to
be cut
Elbow
Section to
be cut
Elbow
1.5 to 2.0
2.0 to 2.5
+0.0
A
–0.4
A
13.2
16.6
19.7
L-shape
pipe
Attached
pipe
Pipe
L-shape
pipe
Socket
Pipe
Pipe