Firmware Update Via "Fwupdate - Bosch Rexroth PST 6 Serie Betriebsanleitung

342 / 416 Bosch Rexroth AG
Service and repair
10.3.2

Firmware update via "FWUpdate"

The following is needed to perform a firmware update
• a PC with the "FWUpdate" software installed,
• an operative connection of the PC via field bus interface Ethernet,
• a BOS database existing on the PC with valid timer reference
(BOS 6000 installed), and
• the firmware as *.hex file.
Procedure:
Start the "FWUpdate" software.
1.
During start, the software looks for a valid timer reference (it is read
from the BOS6000 database) and shows you the respective linked
timers in form of a table:
Use the "SST firmware" command button to select the path and file
2.
name of the desired firmware.
Firmware files have the filename extension "hex".
The current selected firmware file is shown in the corresponding in­
put fields.
Select the timers in which the firmware is to be implemented via the
3.
checkbox in the left margin.
If you wish to select/deselect all timers together, use the left check­
box in the header bar of the table.
Select the desired options for the firmware update via checkbox. The
4.
selected options will apply to all timers selected.
PST 6xxEx | 1070087088 / 08