Front View (Overview); Fig. 2:Front Panel View. Example: Pst 625E - Bosch Rexroth PST 6 Serie Betriebsanleitung

252 / 416 Bosch Rexroth AG
Information on this product
5.2.1

Front view (overview)

Fig. 2:Front panel view. Example: PST 625E

Heat sink / cooling water connections.
Refer to section 7.1.1 and 7.3.
Mains connection terminals (refer to page 320)
Display and operating elements. Refer to page 255.
Right‐hand side of enclosure: RAM buffer battery (refer
to page 339) and timer functionality switch (manual
gun/machine applications, refer to page 256).
X3C: V24 connection for PC (for programming,
X1S1: Supply input for
X2U: Pressure output (gun force).
X2O: discrete outputs (O00 through O11).
X1S2: 24V output for power supply of X2I and
X2I:
Blanking plate / Ethernet field bus module
For connection of several timers to a central PC (pro­
gramming, logging, diagnostics, fault display via
BOS).
For module installation, refer to Sect. 5.2.6, page
257.
Welding transformer connection terminals
(refer to page 320)
The dimensions of the joint enclosure and the functional units for
"cooling" and "thyristor power unit" depend on the size of the in­
tegrated power supply unit and may differ from the example shown
above.
For information on assembly and connection of the product, refer to
section 7 from page 307.
PST 6xxEx |
logging, diagnostics, fault display via BOS). For
pin assignment, refer to page 325.
logic (refer to page 318),
fan control (refer to page 324),
supply I/O field (refer to page 319).
.
For pin assignment, refer to page 322.
For signal assignment, refer to section 7.2.9 from
page 326.
0V reference potential for X2O.
Refer to section 7.2.9 from page 326.
discrete inputs (I00 bis I15).
For signal assignment, refer to section 7.2.9 from
page 326.
1070087088 / 08