Electrical Connection - Bosch Rexroth WSC60GK Betriebsanleitung

52/73 Bosch Rexroth AG
Safety instructions
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Inappropriate fastening
Possibility of reduction of personal/plant safety, function disturbances!
Make sure that the place of installation and the method of

fastening the modules are selected according to their weight!
Please also note dynamic forces which may affect the product.
Heavy loads and sharp metal edges
Higher risk of injuries through lifting of excessive weights, bruises
or cutting!
When you plan and perform the work, please always note the

weight of the product (refer to technical data) and use appropriate
hoisting and transportation equipment, if necessary.
Wear appropriate working clothes and use suitable protective

equipment (e.g. protective helmet/shoes, protective gloves
2.6.4

Electrical connection

Dangerous electrical voltage
Possibility of cardiac arrhythmia, burns, shock!
The electrical connection may only be made by a skilled electrician

who observes the valid safety regulations, the mains voltage
and the maximum current consumption of the plant sections.
Use suitable, insulated tools for all electrical connection work.

Insufficient PE conductor system
Reduction of personal/plant safety!
The product must be connected to the PE conductor system of the

plant correctly.
Make sure that the conductor cross-section of the PE conductor is

of sufficient size.
The electrical continuity of the PE conductor system must be verified

in accordance with EN 60204 Part 1.
Insufficient emergency–stop/emergency-halt facilities
Reduction of personal/plant safety!
Emergency–stop/emergency-halt facilities must be active and within

reach in all system modes.
Please note EN 60204-1.

Releasing an emergency–stop/emergency-halt facility must not

result in an uncontrolled restart of the system.
Make sure that moving system elements are halted safely before

accessing the danger area of the system!
Check the proper functioning of the emergency-stop/emergencyhalt

circuit prior to start-up.
R911345359 | WSC60GK/HA/ST
CAUTION
WARNING