Installation Requirements; Installation Position; Electrical Connection Of The Product - Bosch REXROTH 3 842 558 625 Montageanleitung

16/28 Installation
7.1

Installation requirements


See also section "Technical data".
7.2

Installation position


Install the lifting module in the desired installation position.
Protection types according to DIN EN 60529
In preferred position, see Fig. 3 and Fig. 4:
F1600 and F3200:
F1000:
→ in case of fl at covering of the mounting plate.
See also section "Technical data".
Positions deviating from Fig. 3 and Fig. 4: IP40
7.3

Electrical connection of the product

See operating manual of the control unit, 3 842 559 935.
B
Fig. 4: Electrical connection of the product
A: Plug

If necessary, rout the connection line (B) through a slot to the desired side.

Seal the other slots with the plug (A).
Bosch Rexroth AG, MPS: Lifting module, 3 842 559 937/2019-07
IP54
IP53
A
559 937-04