1.3
Presentation of information
Standardized warnings and safety instructions, symbols, terms and abbreviations
are used so that you can use this documentation to work quickly and safely
with your product. These are explained in the following chapters to help you
understand them better.
1.3.1
Warnings
In this documentation, the following risk classes are applied to indicate to hazards
and their prevention:
Table 2: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word Meaning
DANGER
WARNING
CAUTION
NOTICE
Warnings are structured as follows:
Type and source of danger!
Consequences of non-compliance
Measures to prevent danger
...
1.3.2
Symbols
The following symbols indicate important information that is not safety-relevant
but increases the comprehensibility of the documentation.
Indicates a hazardous situation that will result in serious injury
or death if not avoided.
Indicates a hazardous situation that may result in severe injury
or death if not avoided.
Indicates a hazardous situation that may result in minor
to moderate injury if not avoided.
Property damage: the product or the surrounding area could
get damaged.
SIGNAL WORD
3 842 559 937/2019-07, MPS: Lifting module, Bosch Rexroth AG
About this documentation
7/28