Disposal And Recycling - Scheppach PN-NTS20 Bedienungsanleitung

In the event of an overloading the motor
will switch itself off. After a cool-down pe-
riod (time varies) the motor can be switched
back on again.
Damaged electrical connection cable
The insulation on electrical connection ca-
bles is often damaged.
This may have the following causes:
• Passage points, where connection cables
are passed through windows or doors.
• Kinks where the connection cable has
been improperly fastened or routed.
• Places where the connection cables have
been cut due to being driven over.
• Insulation damage due to being ripped out
of the wall outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables
must not be used and are life-threatening
due to the insulation damage.
Check the electrical connection cables for
damage regularly. Make sure that the con-
nection cable does not hang on the power
network during the inspection.
Electrical connection cables must comply
with the applicable VDE and DIN provi-
sions. Only use connection cables with the
marking „H05VV-F".
The printing of the type designation on the
connection cable is mandatory.
AC motor
• The mains voltage must be 230 V~
• Extension cables up to 25 m long must
have a cross-section of 1.5 mm
Connections and repairs of electrical equip-
ment may only be carried out by an elec-
trician.
Please provide the following information in
the event of any enquiries:
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58  www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

13. Disposal and recycling

DThe equipment is supplied in packaging to
preven it from being damaged in transit. The
raw materials in this packaging can be re-
used or recycled. The equipment and its ac-
cessories are made of various types of ma-
terial, such as metal and plastic. Defective
components must be disposed of as special
waste. Ask your dealer or your local council.
Old devices must not be disposed of
with household waste!
to waste electrical and electronic equipment
(WEEE). This product must be disposed of
at a designated collection point. This can
occur, for example, by handing it in at an
authorised collecting point for the recycling
of waste electrical and electronic equip-
ment. Improper handling of waste equip-
ment may have negative consequences for
the environment and human health due to
potentially hazardous substances that are
often contained in electrical and electronic
equipment. By properly disposing of this
product, you are also contributing to the ef-
fective use of natural resources. You can
obtain information on collection points for
waste equipment from your municipal ad-
ministration, public waste disposal authority,
an authorised body for the disposal of waste
.
2
electrical and electronic equipment or your
waste disposal company.
This symbol indicates that this product
must not be disposed of together with
domestic waste in compliance with
the Directive (2012/19/EU) pertaining
GB 19