Troubleshooting; Possible Cause - Scheppach PN-NTS20 Bedienungsanleitung

14. Troubleshooting

Fault

Possible cause

Check whether the plug is
plugged in.
Check whether there is power
Motor does not
to the socket.
run
Check whether the vacuum
cleaner on/off switch is
switched on.
Is the brush blocked?
Reduced
vacuuming power Is the dust bag full of dust?
Is the filter full of dust?
20 GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Switch the vacuum cleaner off to remove
the blockages.
Remove and empty the dust bag.
Remove and empty the filter.