Disposal And Recycling; Troubleshooting - Scheppach ASP15-ES Original Bedienungsanleitung

12. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective com-
ponents must be disposed of as special waste. Ask
your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point.

13. Troubleshooting

Fault Possible cause
Check whether the plug is plugged in.
Check whether there is power to the
Motor does not run socket.
Check whether the vacuum cleaner
on/off switch is switched on.
Is the brush blocked
Reduced vacuuming
power Is the dust bag full of dust
Is the filter full of dust
18 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
This can occur, for example, by handing it in at an
authorised collecting point for the recycling of waste
electrical and electronic equipment. Improper han-
dling of waste equipment may have negative conse-
quences for the environment and human health due
to potentially hazardous substances that are often
contained in electrical and electronic equipment. By
properly disposing of this product, you are also con-
tributing to the effective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Switch the vacuum cleaner off to remove the
blockages.
Remove and empty the dust bag.
Remove and empty the filter.