Flott P 30 STG PV Betriebsanleitung Seite 30

GB
Software module „Freischneidzeit" („dwell time")
From rel. 1.6A on, the programmable feed unit PV electronic can as an option be fitted with a variable dwell time
unit.
General description
This function allows the user when drilling with activated feed unit to adjust the dwell time (retention time) when the
drilling depth has been reached.
Setting the value
This function can only be used if the mode „drilling with PV" is active. Hitting the key longer than 1,5 seconds
opens the menu „Funktionsauswahl".
Freischneiden: („dwell time") 0,0 s
Use and to change the value between 0,0 and 9,9 seconds.
Hitting the key again longer than 1,5 seconds or leaving the display longer than 20 seconds without any key
stroke closes the menu.
28
205289 D/GB