Flott P 30 STG PV Betriebsanleitung Seite 22

Operating Instructions for "Programmable Feed PV electronic"
General Description
Our latest development, the programmable drilling feed PV electronic is a state-of-the-art, electronically controlled
drilling feed with an electromagnetic coupling for machining wood, nonferrous metal and steel.
All significant process data are digitally displayed and can be changed effectively and intuitively at a keyboard at any
time.
Aside from the standard functions "Manual drilling" and "Feed drilling", the series model
PV electronic also features an electronic thread-cutting and relief-milling device.
Spindle speed
Actual value for drilling depth
1.0 Display Elements and Operator's Controls
Operating mode Manual feed
Operating mode Programmable feed
Operating mode Tapping
Reset key: sets the current actual value for drilling depth to 0
Enter key: accepts the current actual value for drilling depth
Line cursor: changes between setpoint value for drilling depth and feed rate
Column cursor: changes within the positions of a value
Plus key: increases the value
Minus key: reduced the value
205289 D/GB
GB
Feed rate
Setpoint value for drilling depth
20