Flott P 30 STG PV Betriebsanleitung Seite 28

GB
Software module „Sprungschaltung" („multi feed") (option)
From rel. 1.6A on, the programmable feed unit PV electronic can as an option be fitted with a multi feed unit.
General description
This multi feed option allows the user to drill holes with up to four variable feed rates. Advantage: quicker passing of
„empty" strokes when working on parts with broken cuts, i.e profiles or tubes.
Activation of „multi feed"
This function can only be enabled in the operating mode „drilling with automatic
feed". Hitting the key longer than 1,5 seconds switches to the menue „Funktionsauswahl".
Multi feed: on (EIN)
use and to change the function between on and off (Ein and Aus)
Hitting the key again longer than 1,5 seconds or leaving the display longer than 20 seconds without any key
stroke closes the menu.
Inputting the parameters
Four pairs of parameters, consisting of drilling depth and corresponding feed rates can be entered.
Example:
26
205289 D/GB