Connected Com System Con Guration - AIR Avionics AIR Control Display 57 Handbuch

6. Systemkon guration

6.5 Connected COM System Con guration

The COM SYSTEM section contains setup parameters for a connected VHF transceiver.
Depending on the type of connected VHF transceiver, di erent parameters are available.
Where possible, menu parameter names are consistent to parameter names in the VHF
transceiver's documentation.
Please note that in dual ACD-57 installations that if a Becker 620X or Dittel/TQ KRT2 is controlled, the
COM SYSTEM menu section is only available on the display the VHF transceiver is directly connected
to.
Please consult the VHF transceiver's documentation for details on parameters and recom-
mended values.
40 ACD-57 Pilot's Manual rev. 2.1 2018/07/12
air avionics