Siemens SIMATIC NET CP 1411 Installationsanleitung Seite 49

All manuals and user guides at all-guides.com
Notes on the CE Approval for SIMATIC NET Products
SIMATIC NET
Product Name
CP 1411
The SIMATIC NET product listed above meets the requirements of EC
EC Directive EMC
directive 89/336/EEC "Electromagnetic Compatibility" and the harmonized
89/336/EEC
European standards (EN) listed in it.
The CE conformity certificates are kept for the authorities responsible
according to the EC directive listed above at the following address:
The product meets the following requirements:
Area of
Application
Area of Application
This product meets the requirements providing that:
Installation
Guidelines
1. You adhere to the installation instructions during installation and
2. You adhere to the installation instructions in the manual of your host
3. You adhere to the installation instructions in the manuals:
The module was tested in a device that complies with the standards listed
Note
above. If the module is operated in a device that does not comply with these
standards, there is no guarantee that the module will comply with the values
stipulated in the pertinent standards.
Siemens Aktiengesellschaft
Automatisierungs- und Antriebstechnik
Gemeinsame Produkte, Projekte Automobilindustrie, Training
Industrielle Kommunikation (A&D PT2)
Postfach 4848
D-90327 Nürnberg
Federal Republic of Germany
Noise emission
Industry EN 50081-2 : 1993
Domestic EN 50081-1 : 1993
operation as described in the installation manual,
device,
• SIMATIC NET, Manual for Triaxial Networks (Triaxialnetze für
Industrial Ethernet)
• SIMATIC NET, Industrial Twisted Pair Networks
6GK1141-1AA00
Requirements regarding
Noise immunity
EN 50082-2 : 1995
EN 50082-1 : 1992