Note The Minimum Insertion Depth (Seat Post And Handlebar Stem); Adjusting The Handlebar Height - Cube CARGO HYBRID 2020 Originalbetriebsanleitung

34 | CARGO HYBRID
7.1.2 Note the minimum insertion depth
(seat post and handlebar stem)
WARNING!
Danger if the minimum insertion
depth is not observed!
If the insertion depth is too small,
the inserted component may become
unstable, break or come loose.
A loose seat post can lead to dan-
gerous cycling situations, falls,
accidents and material damage.
Always ensure the correct insertion
Î
depth when adjusting the seat post
and handlebar stem.
Never go below the minimum insertion
Î
depth of the seat post or handlebar
stem.
If necessary, observe the information
Î
on the minimum insertion depth in
the component instructions for the
seat post or handlebar stem.
WARNING!
Danger if inserted to the wrong
depth!
Many adjustments to the Cargo
Hybrid require expert knowledge.
If you carry out adjustment work
on the Cargo Hybrid without the
necessary expertise, this can lead
to dangerous falls, accidents and
material damage.
Only carry out the adjustment work on
Î
the Cargo Hybrid described in these
original instructions yourself if you
have the appropriate basic technical
knowledge and experience, as well as
the appropriate tools.
Only carry out adjustment work on
Î
the Cargo Hybrid itself for which you
will find descriptions in this original
operating manual or other applicable
documents.
In case of doubt and/or if you have
Î
any questions, please contact your
specialist bicycle dealer.
Minimum seat post insertion depth
There is a mark on the seat post which indicates
the minimum insertion depth of the seat post in
the seat tube.
When the clamp is fixed, the marking on the
seat post must not be visible, but must be in the
seat tube.
Bild:
Marking for the minimum seat post
insertion depth
Minimum insertion depth of the handlebar stem
Observe the separate component
instructions for the Speedlifter. In it,
you will find all detailed information of
the component manufacturer.
Please observe the information regarding the
Î
minimum insertion depth of the handlebar
stem in the enclosed component instructions
for Speedlifter.
7.2 Adjusting the handlebar
height
Observe the separate component
instructions for the Speedlifter. In it,
you will find all detailed information of
the component manufacturer.
The handlebars of your Cargo Hybrid can be
adjusted in height quickly and without the use of
tools. In this way, you can spontaneously adapt the
handlebar adjustment to the respective cycling
situation as required.
1. Unfold the quick-release on the handlebar
stem outwards.
2. Adjust the desired handlebar height by moving
the stem up or down.