Gearshift, Manual Drive (Chain) - Cube CARGO HYBRID 2020 Originalbetriebsanleitung

8.3

Gearshift, manual drive (chain)

Problem
Gear does not change at all or
only improperly.
Chain (manual drive) blocked
after or during shifting.
Unusual noises such as
cracking, loud grinding and/or
beating
Irregular resistance during
pedalling
Chain has come off
Chain jumps off after or during
shifting
Chain constantly comes off
Possible causes
• Shift lever not operated
correctly
• Gearshift misadjusted
• Too much pressure on the
pedal and/or pedalling too
slowly on steep inclines.
• Chain jammed
• Drive/switching components
damaged
• Drive/switching components
damaged
• Incorrect operation of the ge-
arshift, gearshift misadjusted
or damaged
• Generally possible under
unfavourable conditions
• Incorrect operation of the
circuit (see component inst-
ructions for the circuit)
• Gearshift misadjusted or
damaged
• Generally possible under
unfavourable conditions
• Permanently incorrect opera-
tion of the gearshift
• Gearshift misadjusted or
damaged
CARGO HYBRID
Remedy
Renewed attempt
Î
Contact your specialist bicycle dealer for
Î
remedy.
Repeat the shifting process in flat terrain.
Î
Switching while stationary: Raise rear
Î
wheel, operate crank in drive direction
until the desired gear is engaged.
Stop, operate the switch in the opposite
Î
direction, lift the rear wheel, turn the
crank in the opposite direction to the
drive direction.
If the crank cannot be moved, under no
Î
circumstances use force. Contact your
specialist bicycle dealer immediately for
remedy.
Contact your specialist bicycle dealer
Î
immediately for remedy.
Contact your specialist bicycle dealer
Î
immediately for remedy.
Stop, lift the chain by hand onto the next
Î
sprocket, lift the rear wheel, operate
the crank in the drive direction (only if
smooth running is possible).
If a repair is not possible in this way,
Î
contact your bicycle dealer immediately
for remedy.
Stop, operate the switch in the opposite
Î
direction, lift the chain by hand onto the
next sprocket, lift the rear wheel, operate
the crank in the drive direction (only if it
can be operated smoothly).
If a repair is not possible in this way,
Î
contact your bicycle dealer immediately
for remedy.
Operate the gearshift exclusively as
Î
described in chapter 8.6
If the gearshift is being operated
Î
correctly, contact a specialist workshop
immediately.
| 43