Cover; Assembly / Disassembly Of Front And Bottom Bracket Cover; Brakes / Wheels; Choosing The Right Brake Pads - Cube AERIUM C:68/TT Bedienungsanleitung

6

Cover

6.1 Assembly / disassembly of front and
bottom bracket cover
Place the cover over the component and
insert the screw by hand (1.5 Nm – 2 Nm).
To disassemble, loosen the screws and
remove the cover.
7

Brakes / wheels

7.1

Choosing the right brake pads

Risk of personal injury and material
damage!
Please note that wheels made of carbon
require special brake pads. The correct
brake pads for carbon wheels are includ-
ed in the scope of delivery and ready-in-
stalled on our SWISS SIDE HADRON
Ultimate 800+ wheels for our SLT models.
1.5-2Nm
1.5-2Nm
7.2 Releasing the hydraulic brakes and
removal of wheels
Move the locking lever on the brake grip
downwards (1). In releasing this, the brake
callipers open. The wheel can now be
removed. The rst time the brake lever is
engaged, the locking lever automatically
returns to the locked position.
Risk of personal injury and material
damage!
Please research the proper handling, use
and maintenance of the brakes in the
enclosed MAGURA instruction manual.
7.3

Check hydraulic disk brakes

Risk of personal injury and material
damage!
Dirty brake disks may reduce braking
e ciency.
Dirty brake disks may reduce braking
e ciency.
1. Pull the brake caliper alternately in all
directions.
•
It should not be possible to move the
caliper.
2. Check your brake system seals:
| 7
AERIUM