Checking The Handlebar Attachments; Checking The Head Set - Cube CARGO HYBRID 2020 Originalbetriebsanleitung

Check that the steering assembly runs
1.
without play.
The following moving parts of the steering
assembly shall have no play:
• Steering column/steering rod
• Steering rod/fork clamp
The steering assembly must only be able
to move around the pivot points and must
otherwise run without play.
Bild: Pivot points of the steering assembly
2. Check the bolts, nuts and split pins on the
steering assembly for completeness.
All screws, nuts and split pins shown must
be present (see picture)
Bild:
Steering with split pin
CARGO HYBRID
6.6 Checking the handlebar
attachments
1. Check shifters, brake levers and grips for
their attachment.
• Hold the handlebars with one hand.
• Try to turn the brake lever with the other
hand.
2. Retighten the fixing screw(s) if attachments
on the handlebars have become loose.
6.7

Checking the head set

The head set is the bearing of the steerer
tube in the head tube.
Your Cargo Hybrid is equipped with
two headsets: You must check both
headsets!
Bild:
Head set on handlebars
Bild:
Head set on steerer tube clamp
| 29