sylvac ISP091201D Bedienungsanleitung Seite 6

1. Operating features of the instrument
- The instrument has two operating modes: basic functions
MODE
(direct access) and advanced functions. In addition to the
configuration functions, you can select 2 references, or work
in Automatic Reference mode (details see chapter 5). You can
also enter a multiplication factor (see chapters 3 and 4).
- The «favourite» key gives direct access to the function used
most often (see chap. 7).
- Sets a Preset value, verifies a selection, and controls switching
SET
off the instrument. By default, SIS mode enables automatic
switch-off with no loss of origin (see chap. 8)
- Personalising the functions
It is possible to activate or de-activate certain functions of the
instrument via Power RS/USB cable, or Bluetooth
- Data transmission parameters
4800Bds, 7 bits, even parity, 2 stop bits.
2. Start
Press a button.
For a Bluetooth
6
connection (see chap. 6).
®
(see chap. 10).
®