Operation With Android Phone; Pairing Charger With Android Phone; Operation With Your Android Phone - HITEC X4 Advanced Bedienungsanleitung

9. Operation with Android Phone

9.1. Pairing Charger with Android Phone

1. Connect the power adapter DC connector to the charger
and then plug the power adapter into outlet (100-240 V AC,
50/60 Hz).
2. Insert AA or AAA battery. When a new battery is inserted
and detected, the battery sign and "CHARGE" in correspond
slot will blinking. Please wait fi ve seconds, the charger
will proceed to the default mode which is charging.

9.1. Operation with your Android Phone

Touch slot number button (1-4) to change operation mode
and current.
Touch system setting icon to change value of temperature
protection, voltage protection, discharge cut-off voltage
and negative delta V.
22
Factory default setting
3. Push and hold "ENTER" button for fi ve seconds, the
bluetooth LED indicator on the charger is blinking in blue
to show the charger is discoverable.
4. When the Apps starts in Android, bluetooth will be
enabled and paired automatically.
Touch "Details" icon to show voltage graphic and battery
internal resistance.