Operating Menu "Test; Operating Menu "Change Zone; Operating Menu "Time - Honeywell TouchCenter BUS-2 Bedienungsanleitung

24
Operating menu
6.4
The key "Test" opens the menu for the walk test as
well as display and buzzer test.
In the menu you can activate the walk test for the
selected zone.
The walk test is switched off by arming/disarming
the zone.
In the menu you can also test the display and the
buzzer of the TouchCenter.
Use the key " " to switch back to operating
menu "Selection".

6.5 Operating menu "Change zone"

The key "Change zone" opens the operating menu
"change zone".
Use the keys " " or "
zone. Then change to this zone with the key "OK".
If the selected zone requires an other operation
code, the display jumps to the menu "Code input".
After entering the required code you can operate
the selected zone
Use the key " " to switch back to operating
menu "Selection".

6.6 Operating menu "Time"

The key "Time" opens the operating menu "Time"
for setting time and date.
Use the keys " " or "
value.
Then change to the next value using key "
Additionally you can activate the daylight saving
time automatic.
Use the key " " to switch back to operating
menu "Selection".
"Test"
" to select the desired
" to adjust the marked
".
Operating Manual TouchCenter Keypad BUS-2
Walk test
In progress
Zone 1/00
Zone 2/00
Zone 3/00
Zone 4/00
Zone 5/00
17 : 05
Time
28 . 01 . 2008
Date
*daylight saving time automatic*
Daylight saving
Autom. On / Off
Zone 1/00
disarmed
Test display
and buzzer
Zone 1/00
disarmed
Menu time
17:10:24
28. Jan 2008
OK
OK