Starting Menu; Operating Menus; Operating Menu "Selection - Honeywell TouchCenter BUS-2 Bedienungsanleitung

22

5.3 Starting menu

After code input the starting menu appears. From
here you can change to the further menus.
The upper part of the screen shows status
information of the system.
Touch the key "
display.
Touch the key with icon "
state.
The info window shows whether the system is
ready for internal arming. In this case the key
"Internal arm" is also visible.
With key "More functions" you change to the
operating menus. The key "Messages" opens a
window with the display of the detector groups.

6. Operating menus

Touch key "More function" to open the operating
menu "Selection".
Operating menu
6.1
The upper part of the screen is shown in all
operating menus.
It is composed of the key "
basic state, the window with the status information
of the system and the key "
previous display.
The selection keys open the operating menus.
When touching the key "More functions", further
selection keys for operating menus appear.
" to jump to the previous
" to jump to the basic
"Selection"
" to jump to the
" for jumping to the
Operating Manual TouchCenter Keypad BUS-2
Clear
zone
Please observe messages
More
functions
Clear
zone
Please observe messages
More
functions
Detector groups
Event memory
More
functions
Keypad
settings
Color set
Clean
screen
Zone 1/00
disarmed
Arming not possible
Zone 1/00
disarmed
Arming not possible
Zone 1/00
disarmed
Change zone
Time
Test
Maintenance
Adresses
Zone 1/00
disarmed
Messages
Internal
arm
Messages