Important Information On Operation; Operator Guidance; Visual Angle; Cleaning And Care - Honeywell TouchCenter BUS-2 Bedienungsanleitung

Operating Manual TouchCenter Keypad BUS-2

3. Important information on operation

The operating and display panel "Comfort Touch Colour" is used as a status display for operating your
intrusion detection central control unit. Operation of the system is dialog managed via a touch screen.
i.e. by touching the display with a finger the desired operating functions can be selected and operated.
The operating and display panel provides clear and comprehensive information on the system status.
Do not operate the touch screen with sharp or rough objects (screen)!

3.1 Operator guidance

Operator guidance is only possible via the touch screen. If no entries are made during operation, the
display on the screen reverts to the basic state and the backlighting is deactivated after approx. 30
seconds (blanked). Touch the screen with the finger to reactivate the display illumination.

3.2 Visual angle

Set the visual angle of the display to obtain optimum legibility.

3.3 Cleaning and care

Before Cleaning disable touchscreen ( see
operating menu "More functions"). For Cleaning
use a damp, soft cloth. DO NOT use any other
liquid, sprays or ammonia-based cleansers.
Do not use abrasive or plastic decomposing liquids, e.g.
petrol, terpentine, thinner, etc. Aggressive cleaning agents
can damage or discolour the surfaces.
Do not use cleaners, e.g. scouring agents, scrub sponges.
Clean with a soft, moist cloth and clear water.
40°
19