Operating And Indication Elements; Acknowledgement Signals; Optical; Acoustical - Honeywell IDENT-KEY 3 Bedienungsanleitung

20
4.

Operating and indication elements

Arm
Function key
Cancel / delete entry
Use this key to
cancel (delete)
already commenced
entries
5.

Acknowledgement signals

5.1

Optical

In no-load status, all indicators are dark. When a function is being executed, the corresponding
indicator is activated for approx. 5 seconds. Details are described in the individual operating
procedures.
The state of the indicator is illustrated as follows:
5.2

Acoustical

Short signal (beep)
Long signal (2 sec.)
Impulse-commutated signal
(4x short in 1 sec.)
Operating Manual IK3 Operating Unit with Keypad
Indicator field
F
1 2
4 5
7 8
3
r
0
Reading acknowledgement
every key or data carrier acknowledgement
Positive acknowledgement
for successfully performed action
Negative acknowledgement
There is no authorization or the action
cannot be performed.
Disarm
Information
i
(e.g. arm / disarm / alarm)
3
6 Numerical keypad
9
Confirm entry/ OK
Use this key to confirm
entries.
On
Off
after activating
Ready (green)
Disarmed (yellow)
Alarm (red or green)
- Red in case of alarm -
- Green in learn mode
Flashes
125 ms
2 sec.
1 sec.