Rimage 2000i Benutzerhandbuch Seite 23

4. Remove the back panel.
a. Remove the Torx T10 screws (Qty. 6) that secure
the back panel.
b. While firmly grasping the top of the back panel, lift
and pull back to remove it.
5. Slide the left side panel straight back and off of the
system.
6. Remove the dust.
Spray the compressed air through the recorders
a.
from front to back.
b. Open the ink cartridge access door.
c. Spray the compressed air through the printer
from front to back.
d. Open the printer access door.
e. Spray the compressed air from the hinges of the
printer access door to the back of the system.
f. Spray the compressed air from the front to the
back of the system, across the USB hub and the power
supply.
100763_M
Downloaded from www.Manualslib.com manuals search engine
Maintain the Rimage 2000i
Left Side
Panel
Ink Cartridge
Access Door
Air Flow
Printer
Access Door
Air Flow
Air Flow
23