Operate The Rimage 2000I; Power On The Rimage 2000I; Pause The Rimage 2000I; Load Discs - Rimage 2000i Benutzerhandbuch

Operate the Rimage 2000i

This section includes information about how to power on and off the Rimage 2000i, pause the system, and load discs. It also
provides instructions for setting your printing preferences.

Power On the Rimage 2000i

-
Important! You must power on the Rimage 2000i before you
power on the PC. If the PC starts before the Rimage 2000i
is powered on, your operating system will not recognize the
autoloader and it will not initialize properly.
Press the power switch on the back of the Rimage 2000i. The power
indicator light illuminates solid green.
Power Off the Rimage 2000i
Press the power switch on the back of the Rimage 2000i. The power
indicator light dims.

Pause the Rimage 2000i

Before you load or unload discs, you must pause the Rimage 2000i.
1. Press and release the operator button to pause the autoloader.
[RIMAGE 2000i PAUSED...] displays on the operator panel.
2. Press the operator button again to return to normal operation.

Load Discs

The supply bin holds up to 100 discs. Use discs that are coated with an
ink-jet printable surface. The media in Rimage Media Kits™ are designed for
optimum print performance.
Use the following procedure to load discs into the supply bin.
Press and release the operator button to pause the Rimage 2000i.
1.
2. Gently move the disc diverter to the right.
100763_M
Downloaded from www.Manualslib.com manuals search engine
Operate the Rimage 2000i
Power Switch
Operator Button
Disc
Diverter
13