Loss Of Power - Sage PolyScience the HydroPro Plus Kurzanleitung

4. Select 'Save' to save your desired preset.
The saved preset will appear onto the 'My
Presets' menu, where you will be able to
use, edit or delete them.
SETTINGS
The settings mode allows you to configure
different parameters for the immersion
circulator, as:
1. Data Logging (setting available for
GSV750 model only): For more
information about the Data Logging
setting, refer to page 10.
2. Probe Calibration (setting available for
GSV750 model only) The probe comes
calibrated from factory, however to
ensure that the probe's accuracy does
not drift over time please calibrate yearly.
The guided calibration cycle can take up
to 30 minutes and will allow you to add
a yearly reminder.
3. Date & Time configuration.
4. Sound & Display configuration.
5. Temperature & Measurement Units
configuration.
6. Help section: the help section will give you
more information about using the probe;
cleaning the appliance and changing the
flow direction.
7. Language configuration.
8. Factory reset.
12

LOSS OF POWER

In the event that electrical power is disrupted
during use, your immersion circulator will
begin operating automatically when power
is restored. The unit will display the time when
power was lost, the amount of time there was
no power and the temperature at which the
unit resumed back to the set temperature
(for the GSV700 model, the unit will only
display the temperature). Use this information
to determine if the item being cooked is safe,
if you are uncertain at all we recommend
that you discard the cooked food.