Program Mode - capital sports Compact Space X Bedienungsanleitung

PROGRAM MODE

The programs P1-P36 are preset. In program mode, only the time countdown
can be set. In the setting mode, the TIME window displays the time and
flashes. Press the +/- button to change the set value. Press MODE to reset the
set value to the default value.
1. The starting time is 30 minutes, only the time countdown can be set. The
time setting range is: [5:00]-[99:00] minutes. Press the +/- button to set the
desired value;
2. Press the start button and the motor starts running at the speed preset by
the program.
3. Press the +/- button or the 3/6/10 button to set the speed of the treadmill.
4. The speed is divided into 10 segments the running time of each segment
is 1/10 of the set time (see speed table on next page).
5. A signal will sound when switching between segments.
6. When the motor is running, press the start/pause button to stop the
treadmill. The motor will stop running and all parameters will remain
unchanged.
7. Press the start/pause button again to continue running at the speed set in
the automatic program
8. When the time reaches 0, the speed will slow down until the treadmill
stops the middle window will display end and a beep will sound.
Note: Pull out the safety key to stop the engine in an emergency. The
buzzer will sound.
EN
41