Quick Start; Manual Program - capital sports Compact Space X Bedienungsanleitung

QUICK START

1. Attach the safety key to the unit the console will light up for 2 seconds
and then go into manual mode.
2. Press the start button. The time window will count down: 5-4-3-2-1. A
signal will sound and the treadmill will start at a speed of 1km/h.
3. Press the stop button while the treadmill is running to stop the treadmill
and set all values to 0.

MANUAL PROGRAM

Turn on the power switch and go directly to normal mode in the manual
program. In stop mode, press the program button to enter normal mode in the
manual program.
Note: In the Manual Program, the values for TIME, DISTANCE and CALORIE
can be set. However, only one of the three modes can be selected, either
Time Countdown, Distance Countdown or Calorie Countdown. It will count
down from the set value.
If you are in manual mode, press the MODE button to set the desired mode.
Then press START to start the Treadmill at 1km/h. Then use the +/- button to
adjust the speed.
When you start the manual program, the TIME window will display [0:00]. The
time, distance and calories are counted and the setting function is turned off.
Press the STOP button while the engine is running. The motor will slow down
slowly and all settings will be reset.
EN
39