Suction Head In The Fuel Tank - Makita EM4351UH Originalbetriebsanleitung

grease may be purchased from your MAKITA dealer.)
CLEANING OF FUEL FILTER WARNING: INFLAMMABLES STRICTLY
PROHIBITED
Interval of Cleaning and Inspection: Monthly (every 50 operating hours)

Suction head in the fuel tank

– The fuel filter (1) of the suction head is used to filter the fuel required by the carburetor.
– A periodical visual inspection of the fuel filter is to be conducted. Open the tank cap, use a wire hook and pull out the suction head
through the tank opening. If the filter is hard or clogged up, replace it.
– Replace the fuel filter at least quarterly to ensure an enough fuel supply to the carburetor. Otherwise an insufficient fuel supply will cause
the engine start failure and limited maximum speed.
– After checking, cleaning or replacing, fix the fuel filter onto the fuel pipe with the hose clamp. Push the fuel filter in all the way to the
bottom of the fuel tank.
0.7 mm - 0.8 mm