Cleaning; Storage When Not In Use; Troubleshooting - Silvercrest SBMS D30 B1 Bedienungs- Und Sicherheitshinweise

reposition the unit . The display will show a slide
bar to indicate the signal strength, the stronger the
signal, the longer the bar will be from left to right .
Bit Rate / Codec / Channels
The display will show the digital audio bit rate
being received with additional information about
the audio codec and channel configuration .
Time
The broadcaster (Radio station) provides clock
information automatically .
Date
This displays the current date provided
automatically by the broadcaster .
˜ Cleaning
Before cleaning: Switch the product off and
remove all plugs!
No acid, chafing or solvent cleaning agents
should be used or the product can be
damaged .
˜ Troubleshooting
To keep the warranty valid, never try to repair the product yourself . If you encounter problems when
using this product, check the following points before requesting service .
Problem
No power
Remote control does not
work
No response from the
product
Clock setting erased
I cannot find the Bluetooth
name of this product on
my Bluetooth device
38 GB/IE
˜ Storage when not in use
Store the product in a dry location to protect it
from dust and direct sunlight .
Before storing the product: Remove the batteries .
Store the product in its original packaging .
Cause / Solution
Ensure that the power cord 46 is properly connected .
Ensure that there is power at the AC outlet .
Press 6 / 20 to turn the product on .
Before you press any playback control button: Select the
correct audio source .
Reduce the distance between the remote control and the
product .
Insert the batteries with their polarities (+/–) aligned correctly .
Replace the batteries .
Aim the remote control directly at the sensor (the sensor is
located on the front of the main unit) .
Disconnect and reconnect the power plug 46 . Turn the
product on again .
Power has been interrupted or the power cord 46 has been
disconnected .
Reset the clock .
Ensure the Bluetooth function is activated on your Bluetooth
device .
Re-pair the product with your Bluetooth device .
Only clean the outside of the product using
a soft, dry cloth!
For persistent soiling, a mild cleaning agent
can be used .