Presetting Stations Manually; For Better Reception; Showing Rds Information; Cleaning - Silvercrest SBMS 30 A1 Bedienungs- Und Sicherheitshinweise

Press / 27 repeatedly until you find
the desired station .
If reception is poor, try to adjust the position
of the FM aerial 48 or try to move the
product to another location .
˜ Presetting stations manually
You can preset up to 30 FM stations .
Tune in the desired station . Press PROG 44
to confirm .
Press ALBUM / PRESET / /
select the preset number . Press PROG 44
to confirm .
Repeat above steps for each station you
want to store in the memory with a preset
number .
˜ For better reception
Fully unwind the FM aerial 48 . Extend the
FM aerial and place it in the position that
offers the best reception quality .
Press ST / MONO 22 to toggle between
stereo and mono mode . This is helpful when
receiving poor signal reception .
˜ Showing RDS information
If you tune to a RDS station, press
INFO 26 repeatedly to scroll through the
following information: Station Text / Station
Name / Program Type / RDS Clock .
˜ Cleaning
Before cleaning: Switch the product off and
remove all plugs!
No acid, chafing or solvent cleaning agents
should be used or the product can be
damaged .
Only clean the outside of the product using
a soft, dry cloth!
For persistent soiling, a mild cleaning agent
can be used .
27 to
Only use a clean, dry cloth for cleaning the
product and never use any corrosive liquids .
Use a slightly moistened cloth and a mild
cleaning agent to remove stubborn dirt .
˜ Storage when not in use
Store the product in a dry location to protect it
from dust and direct sunlight .
Before storing the product: Remove the batteries .
Store the product in its original packaging .
˜ Troubleshooting
To keep the warranty valid, never try to repair
the product yourself . If you encounter problems
when using this product, check the following points
before requesting service .
GB/CY 21