Listen To Music From Bluetooth Device; Cleaning - Silvercrest SBW 60 A1 Bedienungs- Und Sicherheitshinweise

To connect your device to the unit via
Bluetooth, follow the steps below:
1. During ON mode, press the SOURCE button
repeatedly on the unit or the BT button on the
remote control to select Bluetooth mode. The
Blue indicator will light flash.
2. Activate your Bluetooth device and select the
search mode. "SBWL 60 A1" will appear on
your Bluetooth device list.
If you cannot find the unit, press and hold the
/PAIR button on the remote control to be
searchable. The system has entered pairing
mode. You will hear "Pairing" from the unit
and the Blue indicator will flash fast.
3. Select "SBWL 60 A1" in the pairing list.
After the "Paired" voice prompt, the system is
successfully connected and the Blue indicator
will light up solidly.
4. Play music from the connected Bluetooth
device.
To disconnect the Bluetooth function,
you can :
• Switch to another function on the unit.
• Disable the function from your Bluetooth
device. The Bluetooth device will be
disconnected from the soundbar after the
"Disconnected" voice prompt.
• Press and hold the
remote control.
Note:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
• The player will also be disconnected when
your device is moved beyond the operational
range.
• If you want to reconnect your device to this
player, place it within the operational range.
• If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the player.
• If the connection is lost, follow the instructions
above to pair your device to the player again.
36 GB/IE
/PAIR button on the

Listen to Music from Bluetooth Device

If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP), you
can listen to the music stored on the device through
the player.
If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the player's
remote control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports
A2DP).
3. Use supplied remote control to control play (if
it supports AVRCP).
To pause/resume play, press the
button on the remote control.
To skip to a track, press the
on the remote control.

Cleaning

• Switch the product off, remove all plugs before
cleaning!
• No acid, chafing or solvent cleaning agents
should be used or the product can be
damaged.
• Only clean the outside of the product using a
soft, dry cloth!
• For persistent soiling, a mild cleaning agent
can be used.
• It is necessary to repair the product if they have
been damaged in any way, for example, if the
housing is damaged, if liquid or objects have
penetrated the device or if the product has
been exposed to rain or moisture.
• Repair work is also required if the device is
not working properly or has been dropped.
If smoke is produced, or there are any
unusual sounds or smells, turn the product off
immediately. In such cases, the product should
not be used until it has been inspected by
authorised service personnel. Only have the
device repaired by qualified personnel. Never
open the housing of the product.
/PAIR
/ buttons