Play Control; Show Playback Times (Audio Cd); Random Playback; Intro Playback - Silvercrest SBMS D30 B1 Bedienungs- Und Sicherheitshinweise

˜ Play control
Button Description
28 Press button to stop playing .
The display shows the number of
tracks on the CD . TO11 indicates the
CD has 11 tracks .
In USB mode, the total number of
tracks is also displayed .
15 Press button to pause playback .
42
15 Press button to resume playback .
42
/ 29 Press button to skip to the
previous / next track .
/ 27 Press and hold button to perform fast
forward / reverse playback .
Release the button to resume normal
playback .
Press ALBUM / PRESET
skip to the previous / next album (only for
MP3 / WMA disc and USB) .
˜ Show playback times
(audio CD)
Press INFO 26 while playing a music CD to:
The remaining term of the title,
The current time on the CD,
The remaining term of the CD .
˜ Random playback
During music playback, press SHUFFLE 37
repeatedly to select a shuffle option play
mode . The selected mode will show on the
display:
Display Description
SHUF FLE
After all the tracks have been
played once, the playback will
stop automatically .
SHUF OFF
Normal playback will resume .
34 GB/IE
˜ Intro playback
˜ Select repeat play options
Display
RPT ONE
RPT ALB
RPT ALL
RPT OFF
˜ Repeat A–B
/ 27 to
˜ Program
The user can program up to 20 tracks in CD / USB
mode in any desired order . If more than 20 tracks
are stored, FULL appears in the display .
During music playback, press INTRO 23 .
The product will play the first 10 seconds of
each track . Press INTRO again to resume
normal playback .
During music playback, press REPEAT 24
repeatedly to select repeat play modes . The
selected mode will show on the display .
Description
Repeat current track .
Repeat the track in the folder
(if a folder is displayed) .
Repeat all tracks .
Repeat turned off .
During music playback, press A–B 36 at
the start point .
Press A–B 36 again at the end point .
The selected section starts to play
repeatedly .
Cancel repeat play: Press A–B 36 again .
NOTE: The section A and B can be set only
within the same track / title .
Press
28 .
Press PROG 10 to enter MEMORY mode .
Press numeric buttons 0 to 9 31 or
29 to select the track that you want to
preset . Press PROG 10 to confirm . Repeat
this step to program more tracks .
Playback program tracks: Press
42 . Each activated state will be cleared
if no buttons are pressed within 20 seconds
or if 28 is pressed .
NOTE: Deleting the program: Press
twice . PRG CLR appears in the display .
/
15 or
28